Radon Testing in Toronto: Why Winter Is the Right Time and What Cleaning Cannot Fix

Every list of ways to improve the air in your home says roughly the same things. Dust with something that holds dust instead of moving it. Vacuum more often. Change the furnace filter. Open a window when the weather allows. Keep the humidity in range. Those are all genuinely useful, and we have written about most of them.
But there is one contaminant in Toronto homes that none of it touches. You cannot see it, smell it or taste it. It does not settle on surfaces, so dusting does nothing. It is not a particle, so no filter captures it. It comes up out of the ground underneath the house, continuously, and the tidiest home on the street is just as likely to have it as the messiest.
Toronto Public Health estimates that about seven per cent of buildings in Toronto — homes, workplaces and schools — may have radon levels high enough to pose a health risk, and that roughly ten radon-related deaths a year in the city could be prevented if those levels were brought down. Health Canada attributes more than 3,000 lung cancer deaths in Canada each year to radon.
And the window for finding out whether your house is one of them is open right now. Radon testing has a season, and in Toronto that season is winter.

What radon is, and why it is not a cleaning problem
Radon is a radioactive gas that occurs naturally in the environment. Toronto Public Health describes it as odourless, colourless and tasteless. It is produced in soil and rock, and when it escapes into the open air outdoors it is diluted immediately and is not a concern. The problem is strictly an indoor one: when the gas finds its way into an enclosed space, it can accumulate.
Health Canada is blunt about how common this is. All homes have some level of radon. The question is never whether your house contains any, but whether the amount it contains is high enough to matter. Toronto Public Health puts the consequence in proportion: radon is the leading cause of lung cancer after smoking, and it causes 16 per cent of lung cancer deaths each year. People who smoke and are also exposed to radon carry a higher risk again than either exposure alone.
This is where it parts company with every other air-quality problem a cleaner can help you with. Dust is a particle, and particles land on surfaces, which is why wiping and vacuuming reduce them. Pet dander is a particle. Pollen is a particle. The fumes from cleaning products are vapours that dissipate once the source is removed and the room is ventilated. Radon is a gas that is being replenished from below the floor the entire time you live there. Remove every particle from the house and the radon concentration does not change by a single becquerel.
That is not an argument against cleaning. It is an argument for knowing which problem you are solving. A clean home is measurably better for dust, allergens and odours. Radon needs a different instrument entirely: a test.
How much radon is in Toronto homes
Health Canada ran a Cross-Canada Survey of Radon Concentrations in Homes and published its final report in 2012. Participants placed alpha track detectors in the lowest lived-in level of their homes and left them for roughly three months during the fall and winter heating season. After recruiting 18,081 participants over two years, the survey produced 13,807 valid results.
At the time, that survey put 6.9 per cent of Canadians in homes with radon above the guideline. Ontario looked comparatively mild on a population-weighted basis at 4.6 per cent of homes exceeding it — but even then, 13 of Ontario’s 36 health regions had more than ten per cent of homes above the guideline. The averages hid the variation.
The national picture has since been revised sharply upward. The same Health Canada page now reports that an updated 2024 survey found approximately one in five houses in Canada — 17.8 per cent — at or above the current guideline. Health Canada’s own public factsheet states the figure plainly: 1 in 5 homes in Canada have high radon levels.
Why a neighbour’s result tells you nothing about yours
The survey’s central conclusion was that radon levels vary significantly across the country, and the practical advice it draws from that is unambiguous: the only way to know if a home has an elevated level of radon is to test, regardless of location.
That sentence does a lot of work. It means a low regional average is not reassurance. It means a neighbour’s clean result is not evidence about your house, because the two buildings sit on different soil, have different foundations, different cracks, different mechanical systems and different habits about when windows get opened. Radon is a property-by-property question answered only by a detector in that property.
How radon gets into a Toronto house
Health Canada’s public factsheet illustrates the entry routes with a diagram of a house, and the labels on it are worth memorising: cracks, fittings, sump, shower and drain. Every one of those is a place where the inside of the house meets the soil without a continuous barrier in between.

In practice that means foundation cracks, the gaps where pipes and conduits pass through a slab or wall, an open sump pit, a floor drain, and the plumbing penetrations behind a basement shower. Health Canada’s guidance on reducing radon says that cracks, gaps around pipes and other potential radon entry points should be sealed — but note carefully what it says sealing is for. It is recommended to maximise the efficacy of a ventilation system, not as a fix on its own. Sealing a crack is a supporting measure, not a solution.
Why the house pulls the gas in
Houses do not passively accept radon; they actively draw it. Health Canada’s measurement guide explains that indoor radon levels are typically higher during colder months for two reasons that compound each other. The first is reduced ventilation from closed windows and doors. The second is increased entry of radon from the soil caused by the stack effect.
The stack effect is the same physics that makes a chimney work. Warm indoor air is less dense than the cold air outside, so it rises and escapes through the upper part of the building, and the resulting slight negative pressure at the bottom has to be made up from somewhere. In a Toronto winter, with a furnace running and a large temperature difference between the heated basement and the back yard, some of that make-up air is drawn through exactly the cracks, fittings, sump and drain that the factsheet diagram labels. The colder it gets outside, the harder the house pulls.
This is the same seasonal mechanism behind several problems we deal with every winter. A sealed-up house in the heating season concentrates whatever is being released indoors, which is why the fumes from cleaning products matter more in January than in July, and why below-grade spaces behave so differently once the furnace comes on. Radon is the version of that story where the source is the ground itself.
The guideline is 200 Bq/m³ — and it applies to a yearly average
The Canadian guideline for radon is 200 becquerels per cubic metre, written 200 Bq/m³. A becquerel is a count of radioactive decays per second, so the number describes how much radioactive activity there is in each cubic metre of the air you are breathing.
If a test comes back above 200 Bq/m³, Health Canada recommends taking corrective action to lower the level within one year. The higher the concentration, the sooner action should be taken, and the target is to reduce levels to as low as practically possible rather than to just scrape under the line. Health Canada is also careful not to present the guideline as a safety threshold: while the health risk from radon exposure below the guideline is small, there is no level that is considered risk free.
The detail most people miss is what the number is measured against. The 200 Bq/m³ guideline applies to your average annual radon level, not to a short-term measurement. Radon concentrations swing by the hour and by the day with weather, wind, barometric pressure and whether a door has been propped open. A reading taken over a weekend is a snapshot of those swings, not an estimate of the year.
That is why Health Canada says short-term measurements are not appropriate for informing mitigation decisions, and why the cheap two-day kits sold as radon tests cannot answer the question you are actually asking.
Why winter is the only valid time to test
Health Canada recommends conducting radon tests over a period of 3 to 12 months, and does not recommend testing for periods shorter than 91 days. On top of that duration rule there is a seasonal one: testing should be conducted so that a minimum of 91 days of the test is during the heating season.
The reason is the stack effect described above. Because indoor radon levels are typically higher during colder months, a test run through the heating season will generally provide a conservative estimate of the annual radon level — it errs on the high side, which is the safe direction to err when the decision is whether to spend money on mitigation.
Health Canada has been studying how far seasonal timing distorts results, and the early findings from its seasonal variation survey make the point from the other end. In all regions of Canada, radon tests during the summer have underestimated annual radon levels. A summer test does not merely give you a different number; it gives you a number that reads low against the annual average you are supposed to be comparing to the guideline. The current recommendation stands: 3-month radon tests should only be done during the heating season. Health Canada is explicit that the early seasonal values should not yet be used to modify or correct any radon measurement, or to change when you test.
The arithmetic for a Toronto household is simple. A detector placed in the middle of November has banked its 91 days by roughly the middle of February, which lands the whole test inside the coldest stretch of the year and inside the heating season by any definition. Wait until the March thaw to start and the clock runs into spring, which is exactly the compromise the guidance is written to prevent.
If you are already thinking about winter air in the house — whether duct cleaning is worth doing and what actually cleans winter air — this is the season to put a radon detector on the same list. It costs one trip to a hardware store and three months of ignoring a small plastic disc.
Where the detector goes
A long-term test is only as good as its placement, and Health Canada’s measurement guide is specific enough that most do-it-yourself mistakes are easy to avoid.

All measurements should be made in a normal occupancy area of the lowest lived-in level of the home. The phrase doing the work there is lived-in. An unfinished crawl space is not a lived-in level; a finished basement family room, a basement bedroom or a below-grade in-law suite is. Health Canada says bedrooms on the main floor or basement should be prioritised, because the bedroom is where most people spend the largest uninterrupted block of their day.
The rooms to avoid are the kitchen, the laundry room and bathrooms — all three have humidity, ventilation and airflow patterns that are not representative of where you actually breathe for eight hours at a stretch.
The placement rules, in order
Height: put the detector in the typical breathing zone, at least 30 cm — about a foot — above the floor.
Clearance from surfaces: keep it at least 30 cm from walls or ceilings, and leave a minimum of 10 cm, about four inches, between the device and any other object.
Clearance from airflow: keep it at least 1 m away from vents, windows, doors, or anything else that may interfere with normal airflow.
Leave it alone: a long-term detector needs 91 days of undisturbed air, which in a working household means choosing a spot nobody will tidy it off.
The five placements that invalidate a test
Health Canada names these specifically. Do not place the device in contact with the floor, the ceiling or an exterior wall. Do not place it in an enclosed space such as a closet or a drawer. Do not place it in an area of high humidity — a sunroom, next to a humidifier, or in a bathroom. And do not place it near a typical radon entry point, which means not beside a sump hole, not in a crawl space, and not next to an exposed crack in the foundation.
That last one is the counter-intuitive rule, and it catches people who are being conscientious. Putting the detector next to the crack seems like the way to find the worst number, but it measures the crack rather than the room, and the guideline is about the air you breathe. If you are in the basement anyway and you find damp, musty conditions down there, that is a separate job with its own method — we have set out what works and what does not for basement mould and when to stop cleaning it.
How to get a test, and who to trust with the result
Toronto Public Health advises using either a do-it-yourself kit or a professional service, and gives one shopping instruction that matters more than price: when purchasing a radon test kit, be sure that it is a long-term test kit, meaning one that measures for at least three months. Kits are sold online and at many home improvement stores, and Toronto Public Health points readers to the Take Action on Radon website for the list of Health Canada-approved tests.
If you would rather not do it yourself, Health Canada recommends radon measurement and mitigation professionals certified through the Canadian National Radon Proficiency Program, usually shortened to C-NRPP. The program oversees professional education and training and imposes its own duties on members. One caveat worth knowing before you hire: certification remains voluntary, so being in business is not the same as being certified, and it is a fair question to ask on the phone.
What to do if the result is above 200
A high result is a fixable problem, which is the genuinely good news in this subject. Health Canada ranks the available approaches clearly.
Active soil depressurisation
Health Canada calls active soil depressurisation, or ASD, the most trusted and effective solution, and says it can reduce radon levels by 90 per cent or more. The principle is to stop fighting the stack effect and work with it: a pipe and fan draw soil gas from beneath the foundation and vent it above the roofline, so the gas takes the path of least resistance outside instead of through your floor. A specialist adapts the installation to what the house has — a foundation slab, a crawl space or a sump pit.
Balanced mechanical ventilation
A balanced mechanical ventilation system — a heat recovery ventilator or an energy recovery ventilator, HRV or ERV — can also help, by bringing in fresh air and removing stale air and radon gas. Health Canada is clear about the trade-off: ventilation systems are less effective than ASD, generally reducing radon levels by only 20 to 50 per cent, and they need to be operated continuously and be well maintained to deliver even that. This is the context in which sealing cracks earns its place, since the sealing is what stops the fresh air you are paying to condition from simply pulling more soil gas in behind it.
Passive systems and new construction
Passive soil depressurisation — a passive radon stack, with no fan — is recommended for new construction and reduces radon by 40 to 90 per cent. Health Canada notes that passive depressurisation systems cannot be relied on to reduce high radon concentrations below the guideline level, and that homes with these systems should still have the radon level tested. A rough-in is a head start, not a result.
Toronto Public Health adds the local financial picture. It does not fund remediation itself, but notes that the Canadian Lung Association and the Ontario Renovates Program may offer assistance to eligible homeowners. It also flags something newer homeowners frequently do not know: radon discovery is covered under Ontario’s New Home Warranty, with mitigation included for homes under seven years old. If your house is newer than that, check the warranty before you pay for anything.
What cleaning does, and where the line sits
It would be easy to read all of the above as a reason to be fatalistic about indoor air, and it is the opposite. Most of what degrades the air in a Toronto home during the heating season is firmly within reach, and radon is the one clearly labelled exception.
Cleaning changes the particle load directly: dust, dander, settled pollen, the grit tracked in on winter boots. It changes the moisture picture, because the surfaces that grow mildew are the ones left damp — the reason keeping indoor humidity in range matters in both directions across the year. And product choice changes what you add to the air yourself, which is the whole subject of the fumes cleaning products release and how to ventilate while you work.
That last one is where our model is relevant rather than incidental. Custom Maids does not supply cleaning products — the client does. It means you decide exactly what enters your home and what gets aerosolised in a sealed winter house: fragrance-free if someone in the household reacts to scent, specific products if there are pets or small children, nothing unknown under the sink. You control the one air-quality variable that is entirely a matter of choice.
Radon is the variable that is not a matter of choice at all, and that honesty cuts both ways. No regular house cleaning service lowers a radon reading, and anyone who tells you otherwise is selling something. In 48 years of cleaning Toronto homes we have been in a great many basements, and what we can tell you about a basement is whether it is damp, whether the air is stale, whether there is visible mould and whether there is grit and dust nobody has reached in years. What we cannot tell you — what nobody can tell you by looking — is the radon concentration. That number comes from a detector left in place for three months, and from nothing else.
Which makes it an unusually cheap thing to settle. A long-term kit is one of the least expensive pieces of information you can buy about a house, the test runs itself while you forget about it, and the result is either a permanent piece of reassurance or the start of a fix that Health Canada credits with cutting radon by 90 per cent or more. The only bad outcome is not knowing, and in Toronto that is roughly a one-in-fourteen gamble on the city’s own estimate of its building stock — and closer to one in five on Health Canada’s national figure.
Sources and Research
The guideline figures and the action timeline in this article come from Health Canada’s radon guideline, which sets the Canadian guideline at 200 Bq/m³, recommends corrective action within one year above that level, and states that while the risk below the guideline is small, no level is considered risk free. The national risk figures — more than 3,000 lung cancer deaths in Canada each year, and 1 in 5 homes with high radon levels — are from Health Canada’s factsheet Radon: what you need to know, which also supplies the entry-point labels used above: cracks, fittings, sump, shower and drain.
The prevalence data comes from Health Canada’s Cross-Canada Survey of Radon Concentrations in Homes — Final Report, which reported 13,807 valid results from 18,081 recruited participants, put 6.9 per cent of Canadians above the guideline in 2012 and Ontario at 4.6 per cent population-weighted with 13 of 36 health regions above ten per cent, notes the updated 2024 figure of 17.8 per cent, and concludes that the only way to know a home’s level is to test regardless of location.
All of the testing method — 3 to 12 months, never shorter than 91 days, a minimum of 91 days during the heating season, the lowest lived-in level, the 30 cm and 1 m clearances and the list of invalidating placements — is from Health Canada’s Guide for radon measurements in residential dwellings, which also explains the colder-month increase in terms of reduced ventilation and the stack effect. The finding that summer tests have underestimated annual levels in all regions of Canada, and the instruction that 3-month tests should only be done during the heating season, are from Health Canada’s seasonal variation of radon in Canadian homes early survey results.
The mitigation figures — 90 per cent or more for active soil depressurisation, 20 to 50 per cent for balanced ventilation, 40 to 90 per cent for a passive stack, and sealing as a measure to maximise a ventilation system’s efficacy — come from Health Canada’s Reduce radon in your home factsheet, while the C-NRPP certification guidance, the note that certification remains voluntary and the warning that homes with passive systems should still be tested are from Health Canada’s radon action guide reduction actions page. The Toronto figures — about seven per cent of buildings in the city, roughly ten preventable deaths a year, radon’s share of 16 per cent of lung cancer deaths, the long-term kit instruction, the Ontario Renovates Program and the New Home Warranty coverage for homes under seven years old — are from Toronto Public Health’s Radon & Your Health.
A Word from Custom Maids Toronto
(Sponsor of the Article)
We have been cleaning Toronto homes for more than 48 years, which is long enough to be straight with you about the difference between a problem we can solve and a problem we can only point at. Dust, grease, mildew, winter grit and stale air are ours. Radon is a detector and, if the number comes back high, a certified contractor.
What we can do is make the rest of the heating season easier on the people breathing in your house. Because our clients supply the products, you decide exactly what goes into your air while the windows stay shut — fragrance-free, pet-safe, child-safe, or simply nothing you have not chosen yourself. That is a real lever, and it is one of the few that is entirely yours.
If you would like the dust, the damp corners and the forgotten basement handled properly this winter, Custom Maids Toronto has been doing exactly that in this city for more than 48 years. Order your radon kit this month, then let us take care of everything a kit cannot measure.
Frequently Asked Questions
Does cleaning or vacuuming reduce radon in a home?
No. Radon is a gas that enters continuously from the soil beneath the house, so there is no surface to wipe and no particle to capture. Cleaning reduces dust, dander and settled pollen, all of which affect how the air feels and how allergies behave, but it has no effect on a radon reading. Lowering radon requires a mitigation system, most often active soil depressurisation.
Can an air purifier or a HEPA filter remove radon?
Filtration is designed to capture particles, and radon is a gas, so a filter is the wrong tool for it. Health Canada’s own reduction guidance names only two approaches that lower radon: active soil depressurisation, at 90 per cent or more, and balanced mechanical ventilation such as an HRV or ERV, at 20 to 50 per cent and only when run continuously and well maintained. Portable air cleaners are not on that list.
How much radon is too much in Canada?
The Canadian guideline is 200 becquerels per cubic metre, written 200 Bq/m³. Above that, Health Canada recommends corrective action within one year, and sooner as the concentration rises. The guideline applies to your average annual level rather than a short-term reading, and Health Canada notes that no level is considered completely risk free.
How long does a radon test have to run?
Health Canada recommends 3 to 12 months and does not recommend any test shorter than 91 days. At least 91 days of the test must fall within the heating season. Short-term tests are not appropriate for deciding whether to mitigate, because radon concentrations fluctuate over hours and days with weather and pressure.
Why does radon testing have to be done in winter?
Two things happen in the heating season at once: windows and doors stay shut, so there is less ventilation, and the stack effect pulls soil gas in through the foundation as warm air escapes upward. Levels are therefore typically highest in cold months, and a heating-season test gives a conservative estimate of the annual average. Health Canada’s seasonal research found that summer tests have underestimated annual levels in every region of Canada.
Where in the house should the detector go?
In a normal occupancy area of the lowest lived-in level, with bedrooms on the main floor or in the basement prioritised. Keep it at least 30 cm above the floor and 30 cm from walls and ceilings, at least 1 m from vents, windows and doors, and at least 10 cm from other objects. Avoid the kitchen, laundry room and bathrooms, and do not place it next to a sump, a crawl space or an exposed foundation crack.
How common is high radon in Toronto?
Toronto Public Health estimates that about seven per cent of buildings in Toronto, including homes, workplaces and schools, may have radon levels that pose a health risk, and that around ten radon-related deaths a year in the city could be prevented by bringing those levels down. Nationally, Health Canada now reports roughly one in five Canadian houses at or above the guideline.
My neighbour tested and their result was fine. Do I still need to test?
Yes. Health Canada’s cross-Canada survey concluded that radon levels vary significantly and that the only way to know whether a particular home has an elevated level is to test it, regardless of location. Two houses on the same street can sit on different soil and have different foundations, penetrations and ventilation, so one result says nothing about the other.
What does it cost to fix a high radon result?
This article does not quote prices, because they depend entirely on the house and the system chosen — and Health Canada recommends using a professional certified through the Canadian National Radon Proficiency Program, noting that certification is voluntary, so it is worth asking. Toronto Public Health does not fund remediation but notes that the Canadian Lung Association and the Ontario Renovates Program may help eligible homeowners, and that radon is covered under Ontario’s New Home Warranty for homes under seven years old.
Where can I buy a radon test kit?
Toronto Public Health says kits are sold online and at many home improvement stores, and directs residents to the Take Action on Radon website for the list of Health Canada-approved tests. The one thing to check on the box is that it is a long-term kit measuring for at least three months — a short-term kit cannot answer the question the guideline is written around.















